SMP/SMPM Fixed Bullets
SV Microwave offers a complete line of SMP and SMPM fixed bullets in a variety of lengths. Our newest fixed bullets start at a nominal length of .265" for SMP and .188" for SMPM. These additional lengths round out SV's fixed bullet offering and allow a system designer flexibility when integrating a board-to-board RF solution.
Features / Benefits:
- Ability to withstand .010" axial and ± .010" radial float
- Small footprint
- A variety of lengths are available
- Lower Insertion Loss than spring-bullets
- DC - 40 GHz (SMP)
- DC - 65 GHz (SMPM)
Applications:
- Board-to-Board solutions
- Mil-Aerospace
- Large scale blind mate arrays
The specifications below are typical for the connector series, but may not apply to this particular part. Please see the datasheet for full specifications.
SMP
| Impedance (Ω) | 50 |
| Frequency GHz | 40 GHz |
| Shielding Effectiveness | ≥ -80 dB DC - 3 GHz ≥ -65 dB 3 - 26.5 GHz |
| Dielectric withstanding Voltage | 500 VRMS |
| Mating Cycles - SB | 1000 |
| Mating Cycles - LD | 500 |
| Mating Cycles - FD | 100 |
| Insertion Force - SB | 3.0 lbs |
| Insertion Force - LD | 5.0 lbs |
| Insertion Force - FD | 7.0 lbs |
| Withdrawal Force - SB | 0.5 lbs |
| Withdrawal Force - LD | 7.0 lbs |
| Withdrawal Force - FD | 9.0 lbs |
| Axial Misalignment | .010” Max |
| Radial Misalignment | 3° Max |
| Temperature Rating | -65°C to +165°C |
| Corrosion (salt spray) | MIL-STD-202, Method 101, Condition B |
| Vibration | MIL-STD-202, Method 204, Condition D |
| Shock | MIL-STD-202, Method 213, Condition I |
| Thermal Shock | MIL-STD-202, Method 107, Condition B |
| Moisture Resistance | MIL-STD-202, Method 106, Less Step 7B |
| Barometric Pressure (Altitude) | MIL-STD-202, Method 105, Condition C, 70k Ft. |
SMPM
| Impedance (Ω) | 50 |
| Frequency GHz | 65 GHz |
| Shielding Effectiveness | ≥ -80 dB DC - 3 GHz ≥ -65 dB 3 - 26.5 GHz |
| Dielectric withstanding Voltage | 325 VRMS |
| Mating Cycles - SB | 500 |
| Mating Cycles - FD | 100 |
| Insertion Force - SB | 2.5 lbs |
| Insertion Force - FD | 4.5 lbs |
| Withdrawal Force - SB | 1.5 lbs |
| Withdrawal Force - FD | 6.5 lbs |
| Axial Misalignment | .010” Max |
| Radial Misalignment | 3° Max |
| Temperature Rating | -65°C to +165°C |
| Corrosion (salt spray) | MIL-STD-202, Method 101, Condition B |
| Vibration | MIL-STD-202, Method 204, Condition D |
| Shock | MIL-STD-202, Method 213, Condition I |
| Thermal Shock | MIL-STD-202, Method 107, Condition B |
| Moisture Resistance | MIL-STD-202, Method 106, Less Step 7B |
| Barometric Pressure (Altitude) | MIL-STD-202, Method 105, Condition C, 70k Ft. |
Application Note
1149-4012
BMB Connector 1149-4012
1290-4008
SMP Adapters 1290-4008
1290-4009
SMP Adapters 1290-4009
1290-4007
SMP Adapters 1290-4007
1132-4010
SMPM Adapters 1132-4010
1132-4021
SMPM Adapters 1132-4021
3290-4002
SMPM Adapters 3290-4002
3290-4003
SMPM Adapters 3290-4003
1132-4139
SMPM Adapters 1132-4139
1132-4140
SMPM Adapters 1132-4140
1132-6157
SMPM Adapters 1132-6157
1132-6158
SMPM Adapters 1132-6158
1132-6159
SMPM Adapters 1132-6159
1112-4186
SMP Adapters 1112-4186
1112-4187
SMP Adapters 1112-4187
1112-4188
SMP Adapters 1112-4188
1112-4189
SMP Adapters 1112-4189
1132-4169
SMPM Adapters 1132-4169
1132-4170
SMPM Adapters 1132-4170
1138-4001
SMPS Adapters 1138-4001
1138-4002
SMPS Adapters 1138-4002
1138-4003
SMPS Adapters 1138-4003
1138-4004
SMPS Adapters 1138-4004