;)
SV Microwave offers a complete line of SMP bullet connectors at high frequencies up to DC to 40 GHz. The SMP bullet connector was developed to meet the need for a smaller high frequency compact design that incorporated ease of use and functionality.
The SMP bullet connector is the heart of this unique design. The bullet is designed to allow the joining of two RF Modules by captivating the bullet between the two shrouds. This mounting method allows for higher density of connectors and by design the SMP bullet connector allows for misalignment to compensate for tolerance stack up. With significant withdrawal forces on the full detent shroud the SMP connector has become a standard for quick and effective interconnects using both semi-rigid and flexible cables. The "Push-on" design allows the installer to mate connectors without the need for threads or wrenches. Today's industry requires both innovation and flexibility, and the SMP bullet connector meets that challenge.
The SMP bullet connector is designed to conform to
-
RF performance DC to 40 GHz
-
-
-
Material and Finish
|
Beryllium Copper per ASTM B196, Copper Alloy UNS C17300 Temper D04 Gold per ASTM B 488, Type II, Code C Class 1.27 over Nickel per AMS-QQ-N-290 Class 1 |
|
|
Shroud (Hermetically Sealed With Corning® 7070 Glass) |
Kovar® per ASTM-F15, Stainless Steel per AMS 5640, Alloy UNS S30300 Free Machining Type 303, Condition A, Passivate Per AMS-QQ-P-35, Type II Gold per ASTM B 488, Type II, Code C Class 1.27 over Nickel per AMS-QQ-N-290 Class 1 |
|
Shroud Non-Hermetic |
Stainless per AMS 5640, Alloy S30300, Free Machining, Type 303 Condition A Passivate per AMS-QQ-P-35, Type II, Gold per ASTM B 488, Type II, Code C Class 1.27 over Nickel per AMS-QQ-N-290 Class 1 |
|
Center Contact (Socket) |
Beryllium Copper per ASTM B196, Copper Alloy UNS C17300, Temper TD04 Gold per ASTM B 488, Type II, Code C Class 1.27 over Nickel per AMS-QQ-N-290 Class 1 |
|
Insulator |
PTFE per ASTM D1710 |
Electrical
|
Frequency |
DC to 40 GHz |
|
Nominal Impedance |
50 Ohms |
|
VSWR |
Bullets 1.10:1 max.: DC to 23 GHz 1.15:1 max.: 23 to 26.5 GHz 1.70:1 max.: 26.5 to 40 GHz Cabled Connectors 1:20:1 max.: DC to 18 GHz 1.35:1 max.: 18 to 26.5 GHz 1.70:1 max.: 26.5 to 40 GHz |
|
Insertion Loss (Adapters) |
.10 dB x ?f (where f = GHz) dB |
|
Insertion Loss (Cable Connectors) |
.12 dB x ?f (where f = GHz) dB |
|
Voltage Rating |
335 VRMS max. at sea level |
|
RF Leakage (fully mated) |
–80 dB – f GHz dB min. to 3 GHz –65 dB min. from 3 to 26.5 GHz |
|
Temperature Rating |
-65°C to +165°C |
|
Dielectric Withstanding Voltage |
500 VRMS min. at sea level |
|
Insulation Resistance |
5,000 megohms min. |
|
Center Contact (Socket) Resistance |
6.0 milliohms max |
|
Outer Contact Resistance |
2.0 milliohms max |
Mechanical
|
Captivation — Center Contacts (Adapters and Right Angle Connectors only) |
|
|
Axial Force |
1.5 lbs. min. |
|
Mating Forces |
|
|
Force to Engage |
Full detent 15.0 lbs. max.; limited detent 10.0 lbs. max.; smooth bore 2.0 lbs. max. |
|
Force to Disengage |
Full detent 5.0 lbs. min.; limited detent 2.0 lbs. min.; smooth bore .5 lbs. min |
|
Durability (Mating Cycles) |
|
|
Adapters |
Full detent 100 max.; limited detent 500 max.; smooth bore 1,000 max. |
|
Cable Connectors |
100 cycles |
|
Axial Displacement |
.000/.010 inch (.000/.254 mm) |
|
Radial Misalignment |
±.010 inch (.254 mm); ± .020 inch (.508 mm) DSCC 94007ZSP-6SC only |
Environmental
|
Shock |
MIL-STD-202, Method 213, Condition I (100 Gs) |
|
Vibration |
MIL-STD-202, Method 204, Condition D (20 Gs) |
|
Barometric Pressure (Altitude) |
MIL-STD-202, Method 105, Condition C (70,000 ft.) (190 VRMS) |
|
Thermal Shock |
MIL-STD-202, Method 107, Condition B (High Temperature +165°C) |
GPO® is a registered trademark of the Corning Gilbert Corp.